Skip to content

Peppers

Pepper seeds not germinating? Temperature and days by type

Pepper seeds need the substrate at 27–32 °C and 7–42 days to sprout, superhots longest. Check the temperature first, then the day count.

Updated

Pepper seeds need the substrate at 27–32 °C and between 7 and 42 days to sprout, depending on the type: superhots take longest. If nothing has come up, measure the temperature of the substrate first, then compare your day count with the table below. Most "failed" trays are simply cold or still inside the normal window.

Days to sprout by type

These are the germination ranges on the cultivar pages, from sowing to the first green loop above the substrate.

GroupExamplesDays
AnnuumExamplesJalapeño, cayenne, serranoDays7–21
Annuum, shortExamplesCubanelleDays7–14
Chinense, habanero typeExamplesOrange habanero, scotch bonnetDays7–28
Chinense, superhotExamplesCarolina Reaper, bhut jolokia, 7 Pot PrimoDays10–42
FrutescensExamplesTabascoDays7–21
Baccatum (aji)ExamplesAji amarilloDays7–28
Baccatum, slowExamplesAji pineappleDays14–42
Pubescens (rocoto)ExamplesRocotoDays10–28

The wide windows are normal. A tray of superhots with no sprouts on day 20 is not in trouble; a tray of jalapeños with none on day 25 is.

Counting the days

The clock starts on the day you sow, not the day you moisten the seed or move the tray to a warmer place. Across the whole pepper pack the shortest germination is 5 days and the longest 42, so a first sprout on day 5 and one on day 40 can both be right for their type. The ranges on the cultivar pages are the ones to use, because a cultivar can differ from the species it belongs to: Cubanelle is 7–14 days where most annuums are 7–21, and Aji pineapple 14–42 where most aji are 7–28.

Substrate temperature

The target for the germination stage is 27–32 °C in the substrate. That is not the room air temperature: a tray on a cold windowsill or a cold floor can be well below the air around it. Put a probe or a thermometer in the substrate itself, not above it, and read it at the same time each day.

Rocoto is the one species with a lower target, 20–30 °C. For every other pepper in the knowledge base, a substrate below 27 °C is outside the target and the sprouting will run toward the long end of the table or beyond it.

A checklist, in order of likelihood

  1. The substrate is too cold. Measure it. This is the commonest reason, and the superhots suffer most because they start at the long end.
  2. You have not waited long enough. Compare the day count with the table. The daily plan in RootQ asks you to check the tray every day during germination, which is the right rhythm: look, do not dig.
  3. The substrate dried out. Keep it evenly moist but not soggy. Clemson Extension warns that a seed in dried-out media is no longer viable, and Pepper Geek advises never letting seed dry before it sprouts.
  4. The mix is too heavy. A light, airy seed-starting mix is what the cultivar pages recommend.
  5. The seed is old. Pepper Geek reports that seed more than a year old can take 3–4 weeks even for a normal type. The knowledge base holds no seed-age data, so treat this as a reason to try a fresh packet, not as a number.

If you have worked through 1–4 and the day count is past the long end for the type, resow, ideally from a different packet, and note how much the calendar moves: a resow adds 7–42 days to the whole cycle, as the sowing-date count shows.

Keeping a record that helps

Sow each type in its own cell or row and label it with the sowing date. Write down the substrate temperature and the day number whenever you look. After a week you have the two numbers that decide whether this is a cold problem or a patience problem, and you can compare them with the table instead of guessing.

Temperatures after the sprout

Once the seedling stage starts the temperatures change. Most peppers want 24–27 °C by day and 18–21 °C at night. A rocoto wants 18–25 °C by day and 15–18 °C at night, so do not give it the warmth the others get. Humidity for all of them is 65–75%.

When they do come up

The seedling stage starts at the first sprout. From then the plant needs 240–300 µmol/⁠m²/s for 14–16 hours and 24–27 °C by day: see leggy pepper seedlings for what that means on a winter windowsill. Put the tray under the light once the first sprouts are up.

To plan the whole cycle backward from the date you want ripe pods, use when to start pepper seeds.

Slow batches are normal for superhots

If you grow a Carolina Reaper next to a jalapeño, expect the jalapeño up in one to three weeks and the Reaper over a spread of up to six. Do not move the Reaper tray to a cooler spot because the other tray is up, and do not resow after three weeks. A late sprout simply starts the cycle later, so allow for it when you pick the sowing date.

The DLI calculator and the lux to PPFD converter are for the next stage, once the first leaves are up.

Questions

What temperature do pepper seeds need to germinate?

Hold the substrate at 27–32 °C. Rocoto (Capsicum pubescens) is the exception: its range is 20–30 °C. It is the substrate that counts, not the air in the room.

How many days do pepper seeds take to sprout?

Annuums such as jalapeño, cayenne or serrano take 7–21 days, habaneros and scotch bonnets 7–28, superhots such as Carolina Reaper or bhut jolokia 10–42 days.

Do ghost pepper seeds really take six weeks?

Superhots are listed at 10–42 days, so six weeks is the upper end of a normal range, not a failure. Keep the substrate warm and moist and keep checking.

How long should I wait before I give up on pepper seeds?

Wait for the long end of the range for that type: 21 days for an annuum, 28 for a habanero, 42 for a superhot. Before that, check the substrate temperature rather than resowing.

Do pepper seeds need light to germinate?

The knowledge base sets no light target for the germination stage, only the substrate temperature. The light targets start with the seedling stage, at 240–300 µmol/m²/s for 14–16 hours.

Sources

A general plan, not yet reviewed: figures are working ranges from these sources, and editorial review is pending.

Calculators for this guide