Skip to content

№ 02 · light

Lux to PPFD calculator

Turn a lux meter or phone reading into PPFD for sunlight, LEDs, HPS and fluorescent tubes, and see the daily light it adds up to.

To the inputs

Input

lx
20,000 lx
Light source
h
16 h

PPFD

290 µmol/m²·s

20,000 × 0.0145 = 290

±15 %: the factor depends on the spectrum.

Daily light
16.7 mol/m²·d

Compared with stage targets

Peppers, vegetative

Too little light

Leafy herbs

In range

Foliage plants

Too much light

Formula

PPFD = lux × k

DLI = PPFD × h × 3600 / 10⁶

A lux meter weighs light by how bright it looks to the eye; plants count photons. The factor k turns one into the other for a given spectrum, so the result is an estimate within about ±15 %.

PPFD
photosynthetic photon flux density at the leaves, µmol/m²·s
lux
illuminance from the meter, lx
k
µmol/m²·s per lux: sunlight 0.0185, white LED 3000⁠–⁠4000 K 0.0145, 5000⁠–⁠6500 K 0.0135, HPS 0.0122, fluorescent 0.0135
h
hours of light per day

Reference

Peppers, vegetative
400–520 µmol/m²·s
Leafy herbs
240–300 µmol/m²·s
Foliage plants
50–200 µmol/m²·s

Stage targets from the RootQ knowledge base: peppers in vegetative growth, leafy herbs at harvest, tropical foliage plants in active growth.

Example

A basil plant, a leafy herb at harvest, grows under a warm white LED of 3000 K. A lux meter at the leaves reads 20,000 lx:

20,000 × 0.0145 = 290

290 µmol/m²·s is inside the 240–300 µmol/m²·s range of leafy herbs at harvest. Over 16 h of light a day it adds up to a DLI of 16.7 mol/m²·d.

Opens RootQ with this calculation: sign in by email and pick your plant.

Save for my plant

Questions

Why convert lux to PPFD?

Lux measures light as the human eye sees it, weighted towards green. Plants also use red and blue, so two lamps with the same lux can feed a plant differently. PPFD counts the photons plants use, in µmol/m²·s, and plant targets are given in it.

How much PPFD do plants need?

It depends on the plant and its stage. In the RootQ knowledge base, peppers in vegetative growth need 400–520 µmol/m²·s, leafy herbs at harvest 240–300 µmol/m²·s, and tropical foliage plants in active growth 50–200 µmol/m²·s.

How accurate is a lux reading?

Within about ±15 %, and less with a phone. The factor depends on the spectrum, phone sensors differ from model to model, and some saturate in direct sun. Hold the sensor where the leaves are, facing the light, and take several readings; for a lamp you rely on, use the maker’s PPFD map or a quantum (PAR) meter.

Plants this matters for