Skip to content

№ 03 · light

Grow light calculator

The lamp power a grow tent or a room needs to reach a target PPFD over its area.

To the inputs

Input

µmol/m²·s
600 µmol/m²·s
m²
1.2 m²
Space
Lamp

Lamp power

314 W

600 × 1.2 / 0.85 / 2.7 = 314

Lamp output, PPF
847 µmol/s

Your target PPFD compared with stage targets

Peppers, vegetative

Slightly above the range

Leafy herbs

Too much light

Foliage plants

Too much light

Formula

PPF = PPFD × S / k

W = PPF / η

PPF is the light a lamp emits each second. Only part of it lands on the plants: more in a tent with reflective walls than in an open room. Efficacy says how many micromoles a lamp makes from each joule of electricity.

PPF
photosynthetic photon flux of the lamp, µmol/s
PPFD
target photon flux density at the canopy, µmol/m²·s
S
canopy area, m²
k
share of the light that reaches the canopy: 0.85 in a grow tent, 0.65 in an open room
W
power the lamp draws from the wall, W
η
efficacy, µmol/J: modern LED 2.7, budget LED 1.8, red and blue LED 1.5, T5 1.0, HPS 1.7

Reference

Peppers, vegetative
400–520 µmol/m²·s
Leafy herbs
240–300 µmol/m²·s
Foliage plants
50–200 µmol/m²·s

Stage targets from the RootQ knowledge base: peppers in vegetative growth, leafy herbs at harvest, tropical foliage plants in active growth.

Example

A 120 × 100 cm tent (1.2 m²) of peppers in vegetative growth, aiming for 500 µmol/m²·s under a modern LED:

500 × 1.2 / 0.85 / 2.7 = 261

261 W at the wall, for about 706 µmol/s of light. The target of 500 is inside the 400–520 µmol/m²·s range of vegetative peppers.

Opens RootQ with this calculation: sign in by email and pick your plant.

Save for my plant

Questions

Why does a room need more power than a tent?

A tent’s reflective walls send stray light back to the plants, so about 85 % of what the lamp emits reaches the canopy. In an open room much of it falls on the walls and the floor, and about 65 % does. For the same PPFD a room needs about 30 % more lamp.

Which PPFD should I aim for?

The target of the stage. In the RootQ knowledge base, peppers in vegetative growth want 400–520 µmol/m²·s, leafy herbs at harvest 240–300 µmol/m²·s, and tropical foliage plants in active growth 50–200 µmol/m²·s.

Is the wattage on the box the real power?

Often not: many lamps are sold by an “equivalent” wattage. Use the power the lamp draws from the wall, from its spec sheet or a plug-in power meter, and its efficacy in µmol/J if the maker gives it.

Plants this matters for