Skip to content

Light and calculators

Daily light integral (DLI) basics

What daily light integral (DLI) is, how it differs from PPFD, and the DLI targets for peppers, herbs, succulents and houseplants under grow lights.

Updated

Plants do not respond to how bright a lamp looks to your eye. They respond to the number of photons they can use for photosynthesis. Two numbers describe that: PPFD and DLI.

PPFD and DLI

PPFD (photosynthetic photon flux density) is the instantaneous rate at which usable photons land on a square metre of leaf, in µmol/⁠m²/s. It is what a quantum meter reads right now.

DLI (daily light integral) is the total dose over a day, in mol/⁠m²/day. If the light is constant:

DLI = PPFD × hours × 3600 / 1 000 000

So 400 µmol/⁠m²/s for 16 hours gives about 23 mol/⁠m²/day. Doubling the hours or the intensity doubles the dose, which is why a weaker lamp left on longer can match a strong one used briefly.

Typical targets

These are working ranges, not laws. Sources differ and plants adapt.

GroupDLI, mol/m²/day
Shade-tolerant foliageDLI, mol/m²/day2–10
Humidity-loving foliageDLI, mol/m²/day1.5–8
Phalaenopsis orchidsDLI, mol/m²/day4–12
Flowering houseplantsDLI, mol/m²/day3–12
Flowering houseplants in bloomDLI, mol/m²/day6–14
Succulents in growthDLI, mol/m²/day8–20
Leafy greens and herbsDLI, mol/m²/day12–17
Pepper seedlingsDLI, mol/m²/day12–17
Peppers, vegetative to fruitingDLI, mol/m²/day20–30

Putting it to use

  1. Measure PPFD at leaf height, not at the lamp. A phone app is a rough guide; a quantum meter is better.
  2. Measure at several points across the canopy and average them. Edges are usually much dimmer.
  3. Pick the hours so that the resulting DLI falls inside the target for the current stage.
  4. Raise or lower the lamp, or change the dimmer, rather than only stretching the photoperiod. Very long days are not free. Indoors 12–14 hours of light is usual, and 16 hours the upper end for home growing.

Fixed hours with a lower intensity is gentler on seedlings. As a plant matures, raise the intensity first and the hours second.

Common mistakes

  • Reading the lamp's catalogue value and ignoring distance. Intensity falls quickly as you move away.
  • Comparing lux with PPFD. Lux is weighted to the human eye and depends on the spectrum, so there is no single conversion.
  • Chasing the top of a range from day one. Ramp up over a week or two when a plant is moved into stronger light.

A window is a different case: its DLI swings with season, latitude, glass and curtains. In winter at higher latitudes a sunny sill may deliver less than a modest grow light.

Questions

What is DLI?

The daily light integral is the total amount of usable light a plant receives over one day, in mol/m²/day. It is PPFD multiplied by the hours of light, converted to moles.

What is the difference between PPFD and DLI?

PPFD is the light landing on the leaf right now, in µmol/m²/s. DLI is the whole-day dose: 400 µmol/m²/s for 16 hours gives about 23 mol/m²/day.

How much DLI do peppers need?

As working ranges, pepper seedlings do well at 12–17 mol/m²/day and peppers from the vegetative stage to fruiting at 20–30 mol/m²/day. Sources differ and plants adapt.

Can I convert lux to PPFD?

Not with a single factor. Lux is weighted to the human eye and depends on the lamp's spectrum, so the same lux can mean different PPFD.

Is a longer photoperiod better than a stronger lamp?

No. Indoors 12–14 hours of light is usual and 16 hours is the upper end for home growing. Raise the intensity first and the hours second as a plant matures.

Sources

A general plan, not yet reviewed: figures are working ranges from these sources, and editorial review is pending.

Calculators for this guide