№ 06 · water
Nutrient dilution calculator
How many millilitres of fertiliser to add to your water: the label dose, or the share of it your plant’s stage needs.
To the inputsInput
Nutrient to add
5.0 ml
2 × 5 × 0.5 = 5.0
- Per litre at this strength
- 1.0
ml/L
Mixing
Add the nutrient to the water and stir, then check EC and pH with a meter: products differ, and the meter has the last word.
Formula
ml = dose × V × strength
C 1 × V 1 = C 2 × V 2
The label gives a full-strength dose per litre. Young plants and plants waking up after winter get a part of it; the strength is that part. The second formula dilutes a solution you already have.
- ml
- nutrient to add, ml
- dose
- label dose, ml/L
- V
- water in the reservoir or can, L
- strength
- share of the label dose: 50 % is 0.5
- C 1
- concentration of the stronger solution, such as its EC
- V 1
- how much of it to take
- C 2
- the concentration you want
- V 2
- how much you want to mix
Example
A pepper plant wakes up after overwintering, and the RootQ knowledge base restarts its feeding at a quarter of the dose. The bottle says 2 ml per litre; the watering can holds 5 L:
2 × 5 × 0.25 = 2.5
Add 2.5
Opens RootQ with this calculation: sign in by email and pick your plant.
Save for my plantQuestions
What strength should I feed at?
Less than the label while a plant is small or just waking up: seedlings get a weaker feed than growing plants, and the RootQ knowledge base restarts overwintered peppers at a quarter of the dose. Raise the strength step by step and let EC readings decide.
How do I dilute a stronger solution?
With C1 × V1 = C2 × V2: take the volume you want times the concentration you want, divided by the stock’s concentration. To make 10 L at EC 1.20 from a solution at EC 2.40, take 5 L of it and top up with 5 L of water, then check the EC: water adds its own.
Can I predict the EC of the mix?
Only roughly, and only if the maker says how much EC a dose adds. Your water adds its own EC too, so mix, stir and measure.